Did you forgot password for your iLO4 web page?
You can reset the same using your OA, either using RIBCL script or by connecting to your iLO via OA and then resetting the same
In the below script replace "2" with the blade number for which you wish to reset the password
Replace "Administrator" as highlighted to the username for which you wish to reset the password
Replace "password" with the password value for provided user
Once done
Login to your OA via ssh client and paste the entire script on your console
Hit Enter to execute the script
You will get output similar to below if the script was executed successfully
NOTE: This can also be done via GUI method
Login to the OA CLI using any ssh client for eg Putty
Next execute the below command to reset the password of your user. Here replace username and password with your username and password value.
Now you can try to login back to your iLO page.
I hope the article was useful.
You can reset the same using your OA, either using RIBCL script or by connecting to your iLO via OA and then resetting the same
Method 1
Using RIBCL scripts you can reset the password of your iLO web pageIn the below script replace "2" with the blade number for which you wish to reset the password
Replace "Administrator" as highlighted to the username for which you wish to reset the password
Replace "password" with the password value for provided user
Once done
Login to your OA via ssh client and paste the entire script on your console
hponcfg 2<< eof
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<USER_INFO MODE="write">
<MOD_USER USER_LOGIN="Administrator">
<PASSWORD value="password"/>
</MOD_USER>
</USER_INFO>
</LOGIN>
</RIBCL>
eof
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<USER_INFO MODE="write">
<MOD_USER USER_LOGIN="Administrator">
<PASSWORD value="password"/>
</MOD_USER>
</USER_INFO>
</LOGIN>
</RIBCL>
eof
Hit Enter to execute the script
You will get output similar to below if the script was executed successfully
Bay 2: Executing RIBCL request ...
Bay 2: Awaiting RIBCL results ...
Bay 2: RIBCL results retrieved.
<!-- ======== START RIBCL RESULTS ======== -->
<!-- ======== Bay 2 RIBCL results ======== -->
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<!-- ======== END RIBCL RESULTS ======== -->
Bay 2: Awaiting RIBCL results ...
Bay 2: RIBCL results retrieved.
<!-- ======== START RIBCL RESULTS ======== -->
<!-- ======== Bay 2 RIBCL results ======== -->
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
</RIBCL>
<!-- ======== END RIBCL RESULTS ======== -->
Method 2
Assuming you are not able to execute RIBCL script for some reason then you can try the alternate methodNOTE: This can also be done via GUI method
Login to the OA CLI using any ssh client for eg Putty
BlrSiteA1-01-01> connect server 2
Connecting to bay 2 ...
User:OAtmp-HPadmin-5A8FAE82 logged-in to Ban17-test-a.BlrSiteA(10.10.112.101 / FE80::7250:6FFF:FCE0:1526)
iLO 4 Advanced for BladeSystem 2.55 at Aug 16 2017
Server Name: Ban17-test-a
Server Power: On
</>hpiLO->
Connecting to bay 2 ...
User:OAtmp-HPadmin-5A8FAE82 logged-in to Ban17-test-a.BlrSiteA(10.10.112.101 / FE80::7250:6FFF:FCE0:1526)
iLO 4 Advanced for BladeSystem 2.55 at Aug 16 2017
Server Name: Ban17-test-a
Server Power: On
</>hpiLO->
Next execute the below command to reset the password of your user. Here replace username and password with your username and password value.
</>hpiLO->set /map1/accounts1/HPadmin password=Passw0rd
status=0
status_tag=COMMAND COMPLETED
Fri Feb 23 11:33:49 2018
status=0
status_tag=COMMAND COMPLETED
Fri Feb 23 11:33:49 2018
Now you can try to login back to your iLO page.
I hope the article was useful.